Technical Review: Omron Proximity Sensor E2B-S08LS02-MC-B1 OMS - Selection Guide & Specs
Share
Overview
In industrial automation environments, unreliable object detection can lead to production downtime, quality issues, and safety hazards. The Omron E2B-S08LS02-MC-B1 OMS proximity sensor addresses these challenges by providing precise, non-contact detection of metallic objects with exceptional reliability and environmental resistance. This advanced sensor is engineered for demanding applications where consistent performance is critical.
Technical Analysis
The E2B-S08LS02-MC-B1 represents Omron's commitment to precision sensing technology. Featuring an 8mm sensing distance and built-in surge protection, this sensor delivers reliable operation in harsh industrial environments. Its compact M8 housing makes it ideal for space-constrained applications while maintaining robust performance characteristics.
| Specification | Value |
|---|---|
| Sensing Distance | 8mm |
| Sensor Type | Inductive Proximity |
| Output Configuration | NPN Normally Open |
| Supply Voltage | 10-30V DC |
| Current Consumption | ≤10mA |
| Switching Frequency | 1kHz |
| Housing Material | Stainless Steel |
| IP Rating | IP67 (Dust Tight & Immersion Protected) |
| Operating Temperature | -25°C to +70°C |
| Connection Type | 2m Cable with M8 Connector |
Application Scenarios
This Omron proximity sensor excels in various industrial applications including position detection in conveyor systems, part presence verification in assembly lines, and limit switching in automated machinery. Its stainless steel construction and IP67 rating make it suitable for challenging environments exposed to coolants, oils, and washdown conditions.
Buying Considerations
When selecting the Omron E2B-S08LS02-MC-B1 proximity sensor, consider these critical factors:
- Sensing Distance Requirements: Verify the 8mm range meets your application needs for object detection
- Target Material: This inductive sensor detects ferrous metals only - ensure compatibility with your target materials
- Mounting Constraints: The compact M8 housing requires proper mounting clearance for optimal performance
- Environmental Conditions: Confirm the IP67 rating provides adequate protection for your operating environment
- Electrical Compatibility: Ensure your control system supports NPN output configuration and 10-30V DC supply
For applications requiring different sensing technologies, explore our full range of proximity sensors and photoelectric sensors.
Frequently Asked Questions
Q: What types of materials can this proximity sensor detect?
A: The E2B-S08LS02-MC-B1 is an inductive proximity sensor designed to detect ferrous metals only. It cannot detect non-metallic materials or non-ferrous metals like aluminum or copper.
Q: What is the difference between NPN and PNP output configurations?
A: NPN output (sinking) switches the negative side of the load, while PNP (sourcing) switches the positive side. The NPN configuration in this sensor is commonly used with PLC inputs and requires proper wiring compatibility with your control system.
Q: Can this sensor be used in wet or washdown environments?
A: Yes, the IP67 rating provides protection against dust ingress and temporary immersion in water up to 1 meter for 30 minutes, making it suitable for washdown applications and environments with exposure to coolants or oils.
